Remember, while many aspects ofwel garage door maintenance can be handled on a DIY fundering, it’s important to recognize when a professional’s expertise kan zijn needed, especially for complex repairs like spring replacements.

This means you won’t have to worry about it breaking unexpectedly, giving you and your family peace of mind.

There are several reasons why you should be maintaining your garage door. Onvergelijkbaar from the most obvious — breaking down and leaving you trapped inside — it may not be opening correctly, is making strange noises or simply isn’t responding. Your garage door is one ofwel the hardest working components of your home, considering it opens and closes just over 1000 times a year and weighs in just over 100kg. It’s just a matter of time before wear and tear starts to take over and thus you begint to notice all the symptoms mentioned above.

To ensure the safety ofwel you and your loved ones, it kan zijn imperative to have a professional technician inspect the cables and pulleys regularly.

Feed the cable through the extension spring and bolt the other end to the upper support bracket. Make one full loop ofwel the cable around the bolt and secure it with a fender washer and a locknut.

Photo: Tom Fenenga for Bob Vila After cleaning the tracks, this hyperlink it is time to move on to lubricating some parts. When you’re thinking about how to lubricate garage door rollers and hinges, remember that using a lithium-based grease or silicone grease kan zijn best.

Clear away the gunk from this area with an old toothbrush so you can check the condition ofwel the cable. Since this cable kan zijn under high tension, don’t try to replace it yourself. Call a garage door professional to replace it.

Handling the world of garage door maintenance may be like deciphering a puzzle. But do not be afraid! With a little knowledge and elbow grease, you can handle most problems on your own. 

Safety first, always. Wear protective gear, a fantastic read ensure your tools are in good condition, and never attempt a repair you’re not comfortable with. Garage doors are heavy and their components are under a lot ofwel tension, especially the springs. If in doubt, it’s always safer to hire a professional.

My lubricant also came with this spray that can be used on rust spots. If you have any rust on your door, it’s a good idea to spray that too.

Tracks: You should not lubricate the tracks, but you can clean them with a damp cloth. If they’re particularly dirty, you can use a solvent like brake cleaner. After cleaning, wipe them down with a dry cloth.

The bearing plates, which have a circular shape, are located on each side of the springs. Both the bearing plates and springs should be lubricated to ensure proper operation.

Clean the tracks on either side of the door to ensure they’re free from debris, which can obstruct the smooth movement of the door.

After you complete these maintenance tasks, shut the garage door and disconnect the power supply before moving on to the following steps.